News

On this episode we have CircuitHub CAM engineer, Dave Wilcox, back on the show to walk us through the PCB CAM process.

What does a NASA JPL underwater vehicle that monitors methane bubbles in the arctic, robots that kill invasive species of starfish, and a robotics swan light show have in common? They are all examples that have used marine robotics components created by Blue Robotics.

On this episode we're joined by Jack McLeans to discuss sensors.AFRICA, a pan-African citizen science initiative that uses low-cost sensors to monitor air, water and sound pollution to give citizens actionable information about their cities.

In this episode Dave Wilcox, CAM engineer at CircuitHub, joins us again to educate us on bare printed circuit board materials....think prepreg, laminate etc.

On today's episode we continue on with our technical sub-series about the assembly process. We delve into selective soldering, which is used to solder through hold components onto boards.

This episode is a continuation of our conversation with Eli Hughes of Tzero. If you haven't checked out the first part, we recommend you do so first before listening to this episode.

On this episode, we chat with CircuitHub customer, Eli Hughes. He tells about how his work at the Penn State Applied Research Lab and background in acoustics led to the founding of Tzero Labs.

In this episode we delve into the process of Automated Optical Inspection (AOI).

On this episode are joined by Dave Wilcox, a CAM engineer at CircuitHub who has been working with PCBs for 32 years. Dave gives us a 10,000 ft level overview of the PCB fab process, using a simple, standard 1.6mm thick, 2-layer board as an example.

Welcome to another week! This episode Chris and Melissa discuss reflow soldering - the high volume soldering method that melts all of the solder at the same time and sets it to the circuit board. Even though it's a relatively simple process, it's a step that is really important to get right.